please visit our store at: vikingoffroad.com
Recovery Gear
Accessories
ATV Recovery Gear
Fairleads
Hardware
Pulley Blocks
Pull-Pal
Recovery Points
Recovery Kits
Recovery Straps-Ropes
Sand Ladders
Spotter Lines
Tire Chains
Tree Savers - Rigging Lines
Wheel Chocks
Winches
Winchlines
Winchline Extensions
X-Jack
 
Winchline Installs / Reviews
 
Apparel & Publications
Caps & Tshirts
Overland Journal
Video
Vehicle Specific
Mercedes G-Wagen
 
Soft Tops
Jeep
Ford Bronco
 
Fairleads for Synthetic Winchlines How to Avoid Cut Winchines
 

The Viking Aluminum Hawse Fairleads are designed to be used with synthetic winchlines only. These fairleads are necessary to replace cast steel hawse fairleads and optional replacement of the factory steel roller fairlead. They are CNC precision machined to provide a smooth guide surface for the synthetic winchline.

Viking Anodized Fairleads use a special anodizing process called 2 Step Process designed to resist fading. The process is one step beyond Hard Anodizing, and we have found this is the only andozing that is fade resistant.

 

50 Series ATV / UTV Hawse Fairlead
PN 100625

The 50 Series ATV / UTV Hawse Fairlead fits a typical ATV 2500-3500Lb. winch. These fairleads are much lighter than ATV roller fairleads and bolt directly in place. They are CNC machined uncoated aluminum with zinc coated hardware and locking nuts.

Bolt Spacing: 4-7/8"

75 Series Short Drum / UTV Hawse Fairlead
PN 100401

The 75 Series Short Drum / UTV fairlead is a short drum farilead for use with competition winches such as the Warn RC, Tmax, or Superwinch Rock 95 etc. They are CNC machined uncoated aluminum with zinc coated hardware and locking nuts.

Note: The 50 Series ATV fairlead is not the same as the 75 series. This fairlead typically works with 4000 and 4500 Lb winches including Short Drum Truck winches.

Bolt Spacing: 6"

   

100 Series Hawse Fairlead
PN 100402 (standard 10" bolt spacing, fits most winches)

The 100 Series fairlead is our economical solution for a precision guide for your synthetic winchline. They are CNC machined uncoated aluminum with zinc coated hardware and locking nuts.

Bolt Spacing: 10"

 
 

250 Series Hawse Fairlead
PN 100403 (standard 10" bolt spacing, fits most winches)

The 250 Series Hawse Fairlead coated with Type II black anodizing for superior wear and corrosion resistance. Stainless Steel Flat Head bolts are supplied for added corrosion resistance with stainless locking nuts.

Bolt Spacing: 10"

 

 

350 Series Hawse Fairlead
PN 100404 (standard 10" bolt spacing, fits most winches)

The 350 Series is a large radius Hawse Fairlead is designed with more surface area and larger wear radius to reduce the pressure on synthetic winchlines. The larger radius extends the life of the winchline due to reduced stress when performing angular pulls. It offers the same top quality wear and corrosion resistance as the 250 series complete with stainless steel hardware including stainless locking nuts.

Bolt Spacing: 10"

   

240 Series Offset Hawse Fairlead
PN 100406 (Ramsey / ARB offset bumper)

The 240 Series Offset Hawse Fairlead is for Ramsey Winches and some ARB bumpers. It offers the same top quality wear and corrosion resistance as the 250 series complete with stainless steel hardware including stainless locking nuts.

   

360 Series Hawse Fairlead
PN 100405 (Superwinch Husky 8 & 10)

The 360 Series Hawse Fairlead specifically designed for the Superwinch Husky 8 and Husky 10 winches. These fairleads offer the same top quality wear and corrosion resistance as the 250 series, but offers more surface area and larger wear radius to reduce the pressure on synthetic winchlines similar to the 350 Series. Comes complete with 35mm metric stainless steel hardware. For Applications with bumper sandwiched between fairlead and winch 40mm bolts are required.

   

Replacement Rollers pictured in Warn powder coated frame.
(Not included)

For Warn Fairlead's where the longer rollers measure 7-7/8"
PN 1000410

For Superwinch, Ramsey, Milemarker, T-Max & Warn Fairlead's where the longer roller measures 7-1/2"
PN 100411

For Superwinch X6CD, X9, S6000 & S9000 Fairlead's where the longer rollers measure 8"
PN 100412

Viking Replacement Delrin Fairlead Rollers

These Viking rollers are designed to be used with synthetic winch lines, replacing the factory galvanized rollers. They are made from Delrin offering high strength, abrasion resistance, and heat resistance, and have a smooth surface to protect your synthetic winch line. The Viking rollers are 68% lighter than stock. .97 Kg (34.4 oz / 2.1 lb) vs. stock steel rollers at 2.4Kg (83.2 oz / 5.2 lb). Delrin is somewhat similar to lightweight alloys like aluminum. We call it the alloy of plastics because it has good machining properties like aluminum, it is dimensionally stable and very tough. The material is resistant to oils, chemicals, UV light and abrasion.

  • Lightweight
  • High resistance to abrasion
  • High heat resistance: maintains serviceable life with intermittent use at 140.5 C (285°F.)
  • Melting point: 165 C (329° F)
  • Tensile strength at 73° F: 8,800 psi
  • Precision CNC Machined

Included: 2 short rollers, 2 long rollers and 8 new retaining rings.

   

Tough Stuff Products E-Z FLip™ License Plate Bracket

This license plate bracket is one of the best ways to attach a license plate to your winch bumper. It is made from high quality laser cut stainless steel and flips out of the way when winching is required. The plate and bracket fits on Roller Fairlead frames in either bolted or pins that are held in place with retaining rings.

NOTE: These license plate brackets do not fit new roller fairleads for Superwinch EP series winches.

Attachment hole dimensions center to center: 8-1/2"

PN: TSP000269

   

 

Steel Roller Fairlead PN 103128

This is one of the best and strongerst roller fairleads available. It includes tight fitting rollers with heavy duty bolts securing everything in place with no rattling.

This is a Superwinch fairlead but is universal in that it fits most winches and bumpers. It has a standard 10" bolt single centered bolt pattern. This fairlead can be used with steel wire cable or synthetic winchlines. Rollers and Frame are heavy zinc coated for durability.


100 series vs. 350 series Viking Haws Fairlead
Original Viking Delrin Replacement Rollers
450 Series shown on Military Kaiser truck. (this fairlead not anodized)
360 series Viking Haws Fairlead for Superwinch Husky
Viking Fairleads 100 vs 350
Viking Rollers
Viking Fairlead 450

 

track your order | privacy | prodlucts | contact
Copyright © Viking Offroad, LLC All rights reserved